IP Kamera 9070IR-PoE User Manual Release Date: 10/20/2009 Manual Version: 1.1 - 1- Ref#90020326K0709
On the router that is being used port forwarded (port triggered) IP Address 192.168.1.882 and port 9070. For this section you may be required to refer
- 11- Ref#90020326K0709 2.) Once the CD has started go to the IP Kamera & IP Video Server section. Then under IP Kamera 9070IR-PoE download t
Default Password: 12345678 1.) Double click on the IPEdit icon to run the program. 2.) Open IPEdit and any device in the same n
1.) Click on the REF button, and wait a few seconds. IPEdit will automatically detect the network settings and setup the device. 2.) Once settings
2.) To setup the device, type in the correct Gateway and IP Address. The Gateway Address: The gateway address can be obtained in Windows under th
4.) Then hit the rescan button on IPEdit to confirm the changes have been made. IP Service How to use IP Service on IPEdit: IP service allows th
4.) Double click on the device name and an Internet Explorer window will appear directly to the device. Note: It is crucial to have the IP Address
2.) Right click on yellow bar and install the activeX controls. 3.) Then click the install button and install the active X controls. - 17-
4.) Once activeX controls have been installed the video feed will show on the screen Note: If no active x controls are showing up, please go to i
- 19- Ref#90020326K0709 The Control Console The IP Kamera 9070IR-PoE Control Console starts in the Section of the webpage. In this section navi
Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Kamera 9070IR-PoE was desig
Live Video The Live video section of the IP Kamera 9070IR-PoE is where the user can view the video of the device. From here resolution, record onto cu
Active Record Active Record: Active record will show up when the device is actively recording. Active recording functions like motion detection, sc
2.) The live view mode will switch to the snapshot mode and the current screen will be displayed 3.) To save the picture right click on the pictu
Camera Name: Select a camera name for the device and then hit submit \ Video Codec: Resolution: Resolution (MPEG4+MPEG4+JPEG): M4:720P,M4:CIF,JPG
M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium Low M-JPEG Fr
White Balance: Select from the following options auto, indoor, or outdoor Day and Night: Select the mode Day or Night TV Output: Select the mode ena
Network Network The network section sets up the network information for the IP Kamera 9070IR-PoE. IP Address: Actual IP Address of the device can be
FTP The FTP section of the IP Kamera 9070IR-PoE setups the FTP saves video clips on FTP. FTP Server: Enter the FTP server address here User Name: E
- 28- Ref#90020326K0709 SNTP Server: Enter the SNTP server address Time Zone: Enter the corresponding time zone Automatically adjust for daylight s
- 29- Ref#90020326K0709 Set the date and Time of the device here. The Local Time: The local time corresponds to the current time of the IP Kamera 9
Table of Content 1.)INTRODUCTION...5
- 30- Ref#90020326K0709 The user setting creates and removes users for access to the IP Kamera 9070IR-PoE. Authority: Select one of the followin
Update To update the device go to the update section. Here the Current Version description is available. To update the device: 1.) Browse for t
Event Log Application The Application Section setups the Video File information, FTP, SD Card, SMTP - 32- Ref#90020326K0709
Setting Snapshot Path Select the snapshot path to the destination where snapshots will be saved. Video File Select the Video File format that th
SD Card File Format: Select the video format to save into the SD card Split Filename Type: Select the format to save the files in the SD card.
SMTP In the settings section, find the SMTP information by clicking on the SMTP tab. Here the current SMTP Server information and email address are
Schedule Record Schedule Record allows selects where the schedule will record the video files to. Schedule Record – Upload via FTP: Saves sched
Motion Detection To enable motion detection: 1.) Select Enable in the motion detection option. 2.) Select the desired sensitivity of choice a.
EPTZ-Set The EPTZ allows the viewed image to be Pan, Tilt, & Zoom. To activate this feature EPTZ must be enabled in the Image section of the 9070
SD Card To access the files on the SD card simply press the SD Card button on the live view screen. To play the file directly: Simply just pres
IMAGESETTINGS...22TUN
http://ipaddress:port/vb.htm?internetip=ipaddress Ex. http command: http://192.168.1.192/vb.htm?internetip=192.168.1.191 Change Port: This command c
How to setup VLC media player & Open a network stream Note: Before using RSTP you must port forward your router to the following port numbers.
10.) Type in the RTSP address of your device For Mpeg4 Stream1 : rtsp://<IP Address>/mpeg4 For Mpeg4 Stream2 : rtsp://<IP Address>:8554/m
- 43- Ref#90020326K0709
9.) Using CNT with Surf16 CH CNT makes connecting to the IP Kamera 9070IR-PoE a very simple task. Surf 16 CH a multi-device DVR monitoring software e
3.) Do not forget to enter the password and login. 10.) Frequently Asked Questions (F.A.Q) Q1: Why can’t I view the video files that I have rec
1.) Introduction The IP Kamera 9070IR-PoE provides reliable, high quality solution to IP Kameras. Its distinctive 720P HD quality picture, Tri-mode
2.) Product Overview Features 1. Tri-Mode Camera (MPG4-1/MPEG4-2/M-Jpeg) 2. Advance Motion detection trigger AVI /Jpeg save on FTP / SD card or Ema
Package Contents 1.) 9070IR-PoE Unit x 1 with Lid 3.) 9070IR-PoE Installation CD 4.) AC Adaptor (AC adaptor will be included and will corr
3.) Interface Description Cable Description Cables DC 12 V Power Input: Plugs in the Power Adapter to the DC 12V Card PoE RJ45 Ethernet: Plug
Please see the image below for reference. Internet Accessible Setup The internet connection can be setup in two main ways so that the 9070IR-PoE ca
Comments to this Manuals